Piccolo - ST
For Vehicle Tracking
All in one small-integrated package with GPS and Cellular antenna, tethered to external 6 - 24VDC (usually the vehicle) battery.

	For in cabin under dashboard install.
	Water proof cover for roof mount install.

• Small 3" x 2" x 0.9" enclosure
• Tethered to external 6 - 24VDC (car battery)
• Easily portable with a cigarette plug

Options

• Two digital IO's, one digital output ON/OFF and one analog input
• Vibration sensor for security alarm
• Accelerometer to detect extreme driving conditions
• External antennas

Integration into your application is as easy as "Plug & Play"
Piccolo is packaged with MidLink middleware, and API's for fast and easy integration into any back office asset and/or fleet management application

Piccolo ST Specifications

Network Availability
GSM/GPRS

Enclosure
Flame retardant ABS plastic

Flame Rating
Rated UL94V-0

GPS
12 channel, WAAS/EGNOS/MSAS support, NMEA0183 protocol

Current Consumption
Transmit mode average current 300mA
Standby mode average current 50mA
Sleep mode 30uA. Configurable.

Piccolo ST Specifications

Dimensions
3.08" x 2" x 0.9" LWD (78.5mm x 52.6mm x 22.8mm)
Additional 0.39" (10mm) on each side for optional mounting brackets.

Weight
4.5oz (130gr) including the cable

Base Functions

• Sends GPS location every XX seconds/minutes and/or every YY miles/km or any combination between time and distance based on speed.
• Programmable and configurable via the air
• Packaged with MidLink Middleware with "Plug & Play" API for quick integration into any third party software
• Packaged with via the air diagnostic and configuration tools

Options

• Digital Inputs- two contact events. One ground sense and one 5VDC- 12VDC positive sense
• Analog Inputs- one 0-5VDC
• Digital Outputs- one open collector 500mA
• Vibration Sensor- sensitivity adjustable for automatic security theft alarm
• Accelerometer- to auto detect extreme driving conditions such as acceleration, sharp turns and brakes
• Water proof enclosure with a blind cover (no LED indicators)
• External SMA connector for cellular and/or GPS antennas
• IO's
  - Two digital inputs (one ground sens one 12VDC positive sense)
  - One analog input 0-5VDC
  - One 500mA open connector output

Installation
In cabin installation (usually under a plastic dashboard).
External roof mount with a blind waterproof cover

Electrical Specifications

Power Source
6V- 24V tethered to vehicle battery or portable with cigarette plug connector

ESD
4kV contact, 15kV air

Protection fuse
2A Fast blow

LED Indicators

GPS
Off when service is disabled, solid green when operating normally, solid orange when GPS current reading is invalid, solid red on GPS error

Modem
Solid green when modem is registered, off when no signal is present or unit is off.

Data
Solid red when data is waiting to be transmitted, off when no data is in the buffer

Power
Solid green when operating normally, off when unit is off

Environmental

Operating Temperature
-22° to 176°F (-30° to 80°C)

Storage Temperature
-40° to 221°F (-40° to 105°C)

Humidity
0 to 99% 110°F (40°C), non condensing

Shock/Vibration/Mechanical
Meets or exceeds EIA standard RS-316B 3G (operating), 20G (non operating) XYZ 3 directions. Meets SAE J1455.